Easily Pass 70-680 Exam With Lead2pass Latest Microsoft 70-680 Brain Dumps (531-540)

Lead2pass is one of the leading exam preparation material providers. We have a complete range of exams offered by the top vendors of their respective industries. You can download free demos in PDF files and our state of the art exam preparation software. Download the full version for an undeniable success in certification exams. Here are some free share of Microsoft 70-680 exam dumps.

QUESTION 531
You use a portable computer that has Windows 7 SP1 installed and is a member of an Active Directory domain. The computer is connected to your Home network.
You run the ipconfig.exe command as shown in the exhibit.

You need to establish a DirectAccess connection from the computer to a DirectAccess server. What should you do first?

A.    Add the computer to a new HomeGroup.
B.    Configure a static IPv4 address.
C.    Create a new VPN connection.
D.    Enable IPv6 on the network adapter.

Answer: D

QUESTION 532
You have a mobile computer that runs Windows XP.
The computer has the following features:
– Contains a single hard disk drive.
– Contains a single partition.
– Supports USB devices during startup.
You are planning a clean installation of Windows 7 Ultimate.
You need to ensure that the installation of Windows 7 Ultimate will support BitLocker To Go Drive Encryption on the system partition.
What should you do?

A.    Use GPOs.
B.    Enable Encrypting File System (EFS).
C.    Verify that the computers have Trusted Platform Modules (TPM) version 1.2 security devices.
D.    Perform a clean install and encrypt the USB drive by using Bitlocker To Go.

Answer: D

QUESTION 533
Note: This QUESTION is part of a series of QUESTIONs that use the same set of answer choices. Ananswer choice may be correct for more than one QUESTION in the series.
You create a new virtual hard disk (VHD) on a Windows 7 Enterprise computer. Then you install Windows 7 on the VHD.
After you reboot the computer, the Windows 7 boot menu shows two different Windows 7 installations titled "Windows 7".
You need to ensure that the Windows 7 boot menu differentiates between the two Windows 7 installations.
What should you do?

A.    Add a boot image in WDS.
B.    Create a capture image in WDS.
C.    Run the BCDEdit command.
D.    Run the PEImg /prep command.
E.    Run the Start /w ocsetup command.
F.    Run the Dism command with the /Add-Driver option.
G.    Run the Dism command with the /Mount-Wim option.
H.    Run the Dism command with the /Add-Package option.
I.    Run the ImageX command with the /mount parameter.
J.    Run the Diskpart command and the attach command option.
K.    Use Syprep with an answer file and set the PersistAllDeviceInstalls option in the answer file to True.
L.    Use Syprep with an answer file and set the PersistAllDeviceInstalls option in the answer file to False.
M.    Use Syprep with an answer file and set the UpdateInstalledDrivers option in the answer file set to Yes.
N.    Use Syprep with an answer file and set the UpdateInstalledDrivers option in the answer file set to No.

Answer: C

QUESTION 534
You have a computer that runs Windows 7.
The computer’s hard disks are configured as shown in the following table:

 
You need to ensure that you can recover the operating system and all the files on the computer if hard disk experiences hardware failure.
What should you do?

A.    Create an Easy Transfer file on an external hard disk.
B.    Create an Easy Transfer file on a network location.
C.    Use the Backup and Restore tool to create a system image on an external hard disk.
D.    Use the Backup and Restore tool to back up data files for all users.

Answer: C

QUESTION 535
Note: This QUESTION is part of a series of QUESTIONs that use the same set of answer choices. AnAnswer choice may be correct for more than one QUESTION in the series.
A company has a deployment of Windows Deployment Services (WDS), the Microsoft Deployment Toolkit (MDT), and the Windows Automated Installation Kit (WAIK).
You are preparing to capture an image of a Windows 7 reference computer.
You plan to deploy the image to new computers that have the same hardware as the reference computer.
You need to ensure that the captured image contains the device drivers from the reference computer.
What should you do?

A.    Run the Dism command with the /Add-Driver option.
B.    Run the Dism command with the /Mount-Wim option.
C.    Run the BCDEdit command.
D.    Run the Start /w ocsetup command.
E.    Run the ImageX command with the /mount parameter.
F.    Run the Diskpart command and the attach command option.
G.    Use Sysprep with an answer file and set the PersistAllDeviceInstalls option in the answer file to True.
H.    Add a boot image in WDS.
I.    Use Sysprep with an answer file and set the UpdateInstalledDrivers option in the answer file to Yes.
J.    Use Sysprep with an answer file and set the PersistAllDeviceInstalls option in the answer file to False.
K.    Create a capture image in WDS.
L.    Run the Dism command with the /Add-Package option.
M.    Use Sysprep with an answer file and set the UpdateInstalledDrivers option in the answer file to No.
N.    Run the PEImq /prep command.

Answer: G

QUESTION 536
Note: This QUESTION is part of a series of QUESTIONs that use the same set of answer choices. Ananswer choice may be correct for more than one QUESTION in the series.
A company has client computers that run Windows 7 Enterprise.
A user has saved files in a C:\Users\ folder that coworkers must be able to read and edit. However, when coworkers try to edit those files, they get an "Access Denied" error.
You need to configure new NTFS permissions for the user’s C:\Users\ folder to ensure that the coworkers have access to write to that folder.
Which two choices should you use to achieve this goal?
(Each correct answer presents a complete solution. Choose two.)

A.    Share Permissions
B.    The Folder Properties window
C.    The User Account Control Settings Control Panel window
D.    The Group Policy Management console
E.    The Services Management console
F.    Local Users and Groups
G.    The Netsh command
H.    Device Manager
I.    The Icacls command

Answer: BI

QUESTION 537
Note: This QUESTION is part of a series of QUESTIONs that use the same set of answer choices. Ananswer choice may be correct for more than one QUESTION in the series.
A company has client computers that run Windows 7 Enterprise. The company also has a file server running Windows Server 2008 R2 that is configured to use BranchCache.
You need to configure the client computers to be BranchCache clients.
Which two choices should you use to achieve this goal?
(Each correct answer presents a complete solution. Choose two.)

A.    Device Manager
B.    Local Users and Groups
C.    The User Account Control Settings Control Panel window
D.    The Group Policy Management console
E.    The Services Management console
F.    The Folder Properties window
G.    The Netsh command
H.    The Icacls command
I.    Share Permissions

Answer: DG

QUESTION 538
Your network consists of an Active Directory domain and 100 computers that run Windows 7.
The domain contains a logon script named logon.cmd.
You plan to deploy a new application named app1.msi by using the logon script. App1.msi is stored in \ \server1\share1.
You need to modify the logon script to deploy the application.
What should you include in the logon script?

A.    Sbdinst.exe -u \\server1\share1\app1.msi -q
B.    Msinfo32.exe \\server1\share1\app1.msi
C.    Pkgmgr.exe /ip /m:\\server1\share1\app1.msi
D.    Msiexec.exe /i \\server1\share1\app1.msi /quiet

Answer: D

QUESTION 539
You are the network administrator for a small organization that has decided to switch the company’s TCP/IP subnet mask. They have chosen to use 255.255.255.240.
What do the subnet ranges go by in a 240 subnet mask?

A.    4
B.    8
C.    16
D.    32

Answer: C

QUESTION 540
You have two DHCP servers on your network. Your computer accidentally received the wrong IP and DNS server configuration from a DHCP server that was misconfigured.
The DHCP server with the incorrect configuration has been disabled.
What commands could you use to release and renew your computer’s DHCP configuration? Choose two.

A.    ipconfig /release
B.    ipconfig /registerdhcp
C.    ipconfig /renew
D.    ipconfig /flushdhcp

Answer: AC

No doubt, 70-680 exam is worth challenging task but you should not feel hesitant against the confronting difficulties. Get a complete hold on 70-680 exam syllabus through Lead2pass training and boost up your skills. No need to hassle if you are stuck in exam difficulties, Lead2pass will assist you right through exam specific preparation material. Lead2pass delivers the most comprehensive preparation material, covering each and every aspect of 70-680 exam curriculum.

www.lead2pass.com/70-680.html