Vendor: EMC
Exam Code: E20-690
Exam Name: VNX Specialist Exam for Platform Engineers
QUESTION 1
Which VNX enclosures use a common motherboard architecture?
A. DME and SPE
B. DPE and SPE
C. DPE and 25-drive DAE
D. Control Station and DME
Answer: A
QUESTION 2
What protocols does the Data Mover support?
A. CIFS, NFS, pNFS and MPFS
B. CIFS, pNFS, and SCSI
C. MPFS, HTTP, FTP, and NFS
D. NFS, FC, and CIFS
Answer: A
QUESTION 3
What are the minimum components required to configure a VNX5500 for Block storage system?
A. Control Station, SP, DAE
B. Control Station, SP, DME
C. SP, DME, DAE
D. SPS, SPE, DAE
Answer: D
QUESTION 4
Which kind of back-end bus connectivity is supported on a VNX storage system?
A. 4 lane 6 Gb/s SAS
B. 4 lane 6 Gb/s FC
C. 2 lane 6 Gb/s SAS
D. 2 lane 6 Gb/s FC
Answer: A
QUESTION 5
How are SAS bus hardware IDs configured for the VNX enclosures?
A. Automatically assigned during system boot process
B. Assigned by the address switch located on each enclosure
C. Assigned by Unisphere Service Manager
D. Assigned by the Backend Bus Reset Wizard in Unisphere
Answer: A
QUESTION 6
A customer asks your help in determining which types of DPE and disk drives are supported in a
VNX storage system. How would you respond?
" SAS or twenty-five 3.5" EFD disk drives
A. 2U DPE with either fifteen 2.5
" EFD, SAS or twenty-five 2.5" SAS disk drives
B. 3U DPE with either fifteen 3.5
" FC, EFD or twenty-five .2.5" SAS disk drives
C. 4U DPE with either fifteen 3.5
" EFD, FC or twenty-five 2.5" EFD disk drives
D. 3U DPE with either fifteen 2.5
Answer: B
QUESTION 7
Refer to the exhibit.
Where is DM 3 located?
A. Location 6
B. Location 5
C. Location 7
D. Location 10
Answer: A
QUESTION 8
What IP address is assigned to the eth2 interface on a Control Station?
A. IP address for the B management network
B. IP address for the A management network
C. Public IP address for the customer’s network
D. IP address for the peer Control Station
Answer: A
QUESTION 9
What IP address is assigned to the eth3 interface on a Control Station?
A. IP address for the A management network
B. IP address for the B management network
C. Public IP address for the customer’s network
D. IP address for the peer Control Station
Answer: C
QUESTION 10
Refer to the exhibit.
Which component is located in location 3?
A. CS 1
B. CS 0
C. DAE 0
D. DAE 1
Answer: A
If you want to pass EMC E20-690 successfully, donot missing to read latest lead2pass EMC E20-690 practice exams.
If you can master all lead2pass questions you will able to pass 100% guaranteed.
