QUESTION 41
What are three primary components that describe TKIP? (Choose three.)
A. broadcast key rotation
B. dynamic WEP
C. message integrity check
D. per-packet key hashing
E. symmetric key cipher
F. WPA2 enterprise mode
Answer: ACD
QUESTION 42
When an AP, in its default configuration mode, connects to a Cisco WLC, which methods are available for remote management access to an AP?
A. SSL and SSH are available only after configuration by a Cisco WLC version 7.0.
B. SSH only
C. HTTPS, and SSH
D. SSH and Telnet
E. SSH and Telnet are available only after configuration by a Cisco WLC version 7.0.
Answer: D
QUESTION 43
Which three options are limitations when configuring basic security on an autonomous AP when using the express security page setup? (Choose three.)
A. You need multiple SSIDs.
B. Delete all the SSIDs.
C. Edit the SSIDs.
D. Use multiple authentication servers.
E. Use the same SSID on both radios.
F. Use a single SSID on a single radio.
Answer: CDF
QUESTION 44
Which two items are used to help convert a lightweight AP into an autonomous AP? (Choose two.)
A. HTTP express setup on the AP
B. Cisco WCS template
C. Cisco WLC CLI
D. Windows Cisco Conversion Tool
E. image with naming convention of platform_name-k9w7-tar.default
F. image with naming convention of platform_name-rcvk9w8-tar
Answer: CE
QUESTION 45
Which three AP modes of operation allow for the wIPS sub mode? (Choose three.)
A. local mode
B. bridge mode
C. monitor mode
D. H-REAP mode
E. rogue detector mode
F. SE-Connect mode
G. sniffer mode
Answer: ACD
QUESTION 46
A lightweight AP has been deployed in local mode in a network that consists of 10 wireless LAN
controllers in a single mobility group. The AP has been configured to use primary, secondary, and tertiary Cisco WLCs. Due to a major power failure, all those Cisco WLCs are unavailable.
Which step does the AP take next?
A. The AP reboots and repeatedly attempts to join the configured primary, secondary, and tertiary Cisco
WLCs in that order. The process continues until one of the configured Cisco WLCs is available.
B. The AP attempts to join a Cisco WLC configured as a master controller.
C. The AP attempts to join the Cisco WLC that has the greatest capacity available.
D. The AP state transitions to AP Fallback Mode and continues to provide limited WLAN services (that is,
no new client authentications) until a Cisco WLC is available.
Answer: B
QUESTION 47
An AP using version 7.0 MR1 broadcasts a Layer 3 CAPWAP discovery message on the local IP subnet. Which step does the AP take next?
A. Determine if the controller responses include the primary controller.
B. Determine if the controller responses include the master controller.
C. Send a discovery request using DHCP option 43.
D. Send a discovery request using DNS.
E. Send a discovery request using locally stored information on the AP.
F. Send a discovery request using OTAP.
Answer: E
QUESTION 48
Which three Cisco Unified Wireless Network capabilities use information that is provided by Radio Resource Management neighbor messages? (Choose three.)
A. aggressive load balancing
B. dynamic channel assignment
C. hybrid remote edge access point
D. intercontroller mobility (that is, mobility groups)
E. over-the-air provisioning
F. rogue AP classification
Answer: BEF
QUESTION 49
A controller is connected to a Cisco Catalyst switch. The switch port configuration looks like this:
interface GigabitEthernet 1/0/10
switchport
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,20,30,50
switchport trunk native vlan 20
switchport mode trunk
Which controller CLI command assigns its management interface to the native VLAN interface of the Cisco Catalyst switch?
A. config interface vlan management 0
B. config interface vlan management 1
C. config interface vlan management 20
D. config interface vlan management 30
E. config interface vlan management 50
Answer: A
QUESTION 50
Which three options relate to event-driven RRM? (Choose three.)
A. any 802.11n AP models
B. specific AP models
C. minimum of AP and WLC
D. minimum of AP, WLC, and WCS
E. minimum of AP, WLC, WCS, and MSE
F. configurable in WLC at 802.11b/g/n > RRM > TPC
G. configurable in WLC at 802.11b/g/n > RRM > DCA
Answer: BCG
If you want to pass Cisco 640-722 successfully, donot missing to read latest lead2pass Cisco 640-722 practice tests.
If you can master all lead2pass questions you will able to pass 100% guaranteed.
