Free Download Of Lead2pass Microsoft 70-680 VCE And PDF Dumps (511-530)

Lead2pass presents the premium set of 70-680 practice test which helps IT professionals in strengthening their Windows Server 2012 knowledge and allowing them to pass the Windows Server 2012 70-680 & other Microsoft Windows Server 2012 certification exams in the first attempt.

QUESTION 511
You are configuring static IPv4 addresses for two computers, Perth and Brisbane, on an isolated private wired subnet.
You configure Perth with the IPv4 address 172.16.10. 140 and the subnet mask 255.255.255.0. You configure Brisbane with the IPv4 address 172.16.10. 210 and the subnet mask 255.255.255.0.

You enter ping 172.16.10.140 on Brisbane, but the command times out. Similarly, entering ping
172.16.10.210 on Perth fails to locate the Brisbane computer’s IPv4 address.
What is the likely reason for this lack of connectivity?

A.    DNS service is not available on the subnet.
B.    The computers should have different subnet masks.
C.    You have not specified a default gateway.
D.    You need to permit ICMPv4 traffic through the firewalls of both computers.

Answer: D

QUESTION 512
You want to prohibit read, write, and execute access to all types of external storage devices. What computer policy setting do you enable?

A.    All Removable Storage: Allow Direct Access In Remote Sessions
B.    All Removable Storage Classes: Deny All Access
C.    Removable Disks: Deny Read Access
D.    Removable Disks: Deny Write Access

Answer: B

QUESTION 513
A user named User1 uses a shared computer that runs Windows 7. User1 is a member of group named Group1. The computer contains a folder named Folder1. The permissions for User1 are shown in the User1 Permissions exhibit. (Click the Exhibit button.)

The permissions for Group1 are shown in the Group1 Permissions exhibit. (Click the Exhibit button.)

You need to ensure that User1 can create files in Folder1. All other members of Group1 must be prevented from creating files in Folder1.
What should you do?

A.    On Folder1, assign the Full control permission to User1.
B.    On Folder1, remove the Deny – Write permission for Group1.
C.    Share Folder1. Assign User1 the Read and Change share permission.
D.    Share Folder1. Assign Group1 the Read and Change share permission.

Answer: B

QUESTION 514
The Aero Shake feature will work if which of the following conditions are met? Choose Two.

A.    A display adapter compatible with WDDM is installed.
B.    Aero features are downloaded from Microsoft.
C.    The windows experience index is at least 2.
D.    The Windows Experience Index is 3 or greater.

Answer: AD

QUESTION 515
Which of the following Windows 7 Editions allows you to join an Active Directory domain? Choose three.

A.    Windows Home Edition
B.    Windows Professional Edition
C.    Windows Ultimate Edition
D.    Windows Enterprise Edition

Answer: BCD

QUESTION 516
You manage a computer that runs Windows 7.
You are tasked to identify which applications were installed during the last week.
What Windows component would you use to find this information? Choose two.

A.    Check the Windows System Change Log in the Control Panel.
B.    View the events in the Applications Log under Windows Logs in the System and Security component section of the Control Panel.
C.    Review the informational events from Reliability Monitor.
D.    Check the Windows System Diagnostics Report under the Performance Monitor MMC.

Answer: BC

QUESTION 517
All the games including Titan Chess come with which versions of Windows 7? Choose two.

A.    Windows Home Edition
B.    Windows Professional Edition
C.    Windows Ultimate Edition
D.    Windows Enterprise Edition

Answer: CD

QUESTION 518
Which of the following is not a minimum requirement to install Windows 7?

A.    1 GHz or faster 32-bit (x86) or a 64-bit (x64) processor
B.    4 GB RAM (32-bit)/2 GB RAM (64-bit)
C.    16 GB available disk space (32-bit)/20 GB (64-bit)
D.    DirectX 9 graphics processor with WDDM 1.0 or higher driver

Answer: B

QUESTION 519
Which of the following is not a rating for games in Windows 7?

A.    General Audience (G)
B.    Everyone (E)
C.    Teen (T)
D.    Adults Only (AO)

Answer: A

QUESTION 520
In Windows 7 you can control when users such as kids can login to Windows 7.
Which of the following best describes where to configure this option?

A.    You cannot choose this feature unless you are connected to a domain.
B.    Go to the Start, Control Panel, User Accounts and Family Safety, Setup Parental Controls, and then choose Time Restrictions.
C.    Go to Start, Control Panel. User Profiles, and then Time Restriction Settings.
D.    Go to the Homegroup settings and choose Offline Time Settings.

Answer: B

QUESTION 521
Which of the following best describes how the user is alerted with information system and configuration alerts?

A.    A popup occurs and the Windows 7 desktop contrast is dimmed. Until you acknowledge the alert the screen will not move.
B.    If Aero is installed the shaking alert flag appears in the index bar of every open window.
C.    A flag in the taskbar with a red "x" indicates there is a problem needing attention.
D.    All of the above.

Answer: C

QUESTION 522
A company is upgrading its client computers from Windows XP to Windows 7.
You add an application to the Windows 7 base image. Large fonts are interfering with the appearance of the application.
You need to ensure that the application is displayed correctly on client computers that run Windows 7.
Which option should you select? (To answer, select the appropriate check box in the dialog box.)

Answer:

QUESTION 523
If you have a router in the network your connected to and the Default Gateway is set to 192.168.1.1 and the subnet mask is 255.255.255.0, which of the following are useable IP addresses on that network?

A.    192.168.1.1
B.    192.168.1.300
C.    192.168.1.30
D.    192.168.2.10

Answer: C

QUESTION 524
Which of the following is true of Windows 7?

A.    MailCentral is included as the new default mail client with Windows 7.
B.    Outlook Express is included with Windows 7.
C.    Microsoft Outlook is included with Windows 7.
D.    There is no preinstalled mail client included with Windows 7.

Answer: D

QUESTION 525
Note: This QUESTION is part of a series of QUESTIONs that use the same set of answer choices. Ananswer choice may be correct for more than one QUESTION in the series.
A virtual hard disk (VHD) contains a Windows 7 Enterprise installation.
You need to mount the VHD on a client computer.
What should you do?

A.    Run the Dism command with the /Mount-Wim option.
B.    Use Sysprep with an answer file and set the UpdatelnstalledDrivers option in the answer file to Yes.
C.    Run the Dism command with the /Add-Package option.
D.    Run the PEImg /prep command.
E.    Add a boot image in WDS.
F.    Run the Dism command with the /Add-Driver option.
G.    Use Sysprep with an answer file and set the PersistAllDevicelnstalls option in the answer file to True.
H.    Use Sysprep with an answer file and set the UpdatelnstalledDrivers option in the answer file to No.
I.    Run the BCDEdit command.
J.    Use Sysprep with an answer file and set the PersistAllDevicelnstalls option in the answer file to False.
K.    Run the Start /w ocsetup command.
L.    Run the ImageX command with the /mount parameter.
M.    Create a capture image in WDS.
N.    Run the Diskpart command and the attach command option.

Answer: N

QUESTION 526
Note: This QUESTION is part of a series of QUESTIONs that use the same set of answer choices. Ananswer choice may be correct for more than one QUESTION in the series.

A company has a server running Windows Server2008 R2, with Windows Deployment Services (WDS), the Microsoft Deployment Toolkit (MDT), and the Windows Automated Installation Kit (WAIK) set up.
The company also has client computers running Windows 7 Enterprise.
You need to remove a virtual hard disk boot option from the Windows startup menu on a client computer.
What should you do?

A.    Run the Start /w ocsetup command.
B.    Run the PEImg /prep command.
C.    Use Sysprep with an answer file and set the UpdatelnstalledDrivers option in the answer file to Yes.
D.    Run the ImageX command with the /mount parameter.
E.    Run the Diskpart command and the attach command option.
F.    Use Sysprep with an answer file and set the PersistAllDevicelnstalls option in the answer file to False.
G.    Run the Dism command with the /Mount-Wim option.
H.    Run the Dism command with the /Add-Driver option.
I.    Run the BCDEdit /delete command.
J.    Add a boot image and create a capture image in WDS.
K.    Use Sysprep with an answer file and set the UpdatelnstalledDrivers option in the answer file to No.
L.    Run the Dism command with the /Add-Package option.
M.    Use Sysprep with an answer file and set the PersistAllDevicelnstalls option in the answer file to True.

Answer: I

QUESTION 527
A company is upgrading its client computers from Windows XP to Windows 7.
You add an application to the Windows 7 base image. The menu on the title bar of the application is not displayed properly, although other graphical elements are displayed correctly.
You need to ensure that the application’s menu is displayed correctly on client computers that run Windows 7.
Which option should you choose to achieve this goal?
(To answer, select the appropriate check box in the dialog box.)

Answer:

QUESTION 528
A company’s security policy prohibits employees from running any software from Fabrikam on computers running Windows 7 Enterprise. The applications are digitally signed by the publisher.
You need to configure a single deny rule in AppLocker by applying a condition to restrict all of the applications from running, without affecting other programs.
You have selected one of Fabrikam’s applications as a reference.
Which property should you choose?
(To answer, select the appropriate setting or settings in the work area.)

Answer:

QUESTION 529
You use a computer that has Windows 7 installed.
You install a legacy application named LegApp. LegApp is designed for Windows 98 and does not support the 16-bit or 32-bit color quality setting.
You need to configure application compatibility settings for LegApp to meet the following requirements:
– Must be compatible with Windows 98.
– The 8-bit color quality setting must be used.
What should you do?
(To answer, configure the appropriate option or options in the dialog box in the answer area.)

Answer:

QUESTION 530
You use a computer that has Windows 7 SP1 installed to access your company’s internal website. The website requires a secure connection. The certificate is a self-signed Secure Socket Layer (SSL).
You attempt to connect to the internal website.
You receive the following error message:
"There is a problem with this website’s security certificate."
You need to be able to connect to the internal website successfully. What should you do?

A.    From Internet Explorer, add the website to the Local Intranet zone.
B.    From Certificate Manager, import the website’s certificate into your Intermediate Certification Authorities store.
C.    From Certificate Manager, import the website’s certificate into your computer’s Personal store.
D.    From Internet Explorer, add the website to the Trusted Sites zone.

Answer: C

These 70-680 exam questions and answers in PDF are prepared by our expert, Moreover, they are based on the recommended syllabus covering all the 70-680 exam objectives. You will find them to be very helpful and precise in the subject matter since all the Microsoft 70-680 exam content is regularly updated and has been checked for accuracy by our team of Microsoft expert professionals.

www.lead2pass.com/70-680.html