Free Materials 70-680 PDF Dumps With Updated Exam Questions (481-490)

Lead2pass presents the premium set of 70-680 practice test which helps IT professionals in strengthening their Windows Server 2012 knowledge and allowing them to pass the Windows Server 2012 70-680 & other Microsoft Windows Server 2012 certification exams in the first attempt.

QUESTION 481
You manage a network device by using a web interface.
You perform all critical Windows updates so that the computer now runs Internet Explorer10. After performing these updates, the layout of the network device web page displays incorrectly.Other web pages display correctly.You need to resolve this issue.
What should you do?

A.    Clear Internet Explorer’s browsing history.
B.    Enable Compatibly Mode for the network device web page.
C.    Set the local Intranet security zone to Low.
D.    Add the network device web page to the trusted sites zone.

Answer: D

QUESTION 482
You have a computer that runs Windows 7.
The computer’s hard disks are configured as shown in the following table.

You need to ensure that you can recover the operating system and all the files on the computer if hard disk 0 experiences hardware failure.
What should you do?

A.    Create a system repair disk.
B.    Use the Backup and Restore tool to back up data files for all users.
C.    Use the Backup and Restore tool to create a system image on an external hard disk.
D.    Create an Easy Transfer file on an external hard disk.

Answer: C

QUESTION 483
Note: This QUESTION is part of a series of QUESTIONs that use the same set of answer choices. AnAnswer choice may be correct for more than one QUESTION in the series.
You use a desktop computer that has Windows 7 Ultimate SP1. This relevant portions of the computer configuration are shown in the following below.
– The Disk Management Console (Click the Exhibit button.)

– The System Properties window (Click the Exhibit button.)

– The System protection for Local Disk C window (Click the Exhibit button.)

You share your Documents library over a network.
You discover that one of the files was deleted from the library by a network user.
You need to restore the most recent version of the deleted file.
What should you do?

A.    Delete restore points.
B.    Create a restore point.
C.    Perform a system restore.
D.    Search for the file in the Recycle Bin.
E.    Increase disk space used for system protection.
F.    Copy the file from a previous version of a folder.
G.    Set restore settings to only restore previous versions of files.
H.    Run the cipher /x command from the elevated command prompt,
I.    Run the vssadmin list volumes command from the elevated command prompt.
J.    Run the vssadmin list shadows command from the elevated command prompt,
K.    Run the compact /U <file_name> command from the elevated command prompt.

Answer: F

QUESTION 484
Your company has a main office and a branch office.
A portable computer runs Windows 7. On the computer, you can configure a printer for each office.
You need to configure printing on the computer to meet the following requirements:
When you are located in the main office, all documents must automatically print to the main office printer.
When you are located in the branch office, all documents must automatically print to the branch office printer.
What should you do?

A.    From Location and Other Sensors, configure a default location.
B.    From Devices and Printers, configure the Manage Default Printer settings.
C.    From Region and Language, modify the Location settings.
D.    From Network and Sharing Centre, configure the network location.

Answer: B

QUESTION 485
Your company network includes desktop computers that have Windows 7 installed.
Microsoft updates are applied automatically at a scheduled time.
A use1-reports that a proprietary application has stopped working.
You need to uninstall the most recent update from Microsoft.
What should you do first?

A.    From the Action Center, open the Windows Update window.
B.    From the Event Viewer, open the System log.
C.    From the Services console, open the Windows Update service.
D.    From the Task Scheduler, view the WindowsBackup node.

Answer: A

QUESTION 486
You use a desktop computer that has Windows 7 Ultimate SP1.
The relevant portions of the computer configuration are shown in the following exhibits:
The Disk Management console (Click the Exhibit button.)

The System Properties window (Click the Exhibit button.)

The System protection for Local Disk C window (Click the Exhibit button.)

You need to create a backup copy of a 40-GB Virtual Hard Disk (VHD) file in a local folder on drive C.
What should you do?

A.    Delete restore points.
B.    Create a restore point.
C.    Perform a system restore.
D.    Search for the file in the Recycle Bin.
E.    Increase disk space used for system protection.
F.    Copy the file from a previous version of a folder.
G.    Set restore settings to Only restore previous versions of files.
H.    Run the cipher /x command from the elevated command prompt.
I.    Run the vssadmin list volumes command from the elevated command prompt.
J.    Run the vssadmin list shadows command from the elevated command prompt.
K.    Run the compact /U <file_name> command from the elevated command prompt.

Answer: A

QUESTION 487
Drag and Drop Question
You use a computer that has Windows 7 Enterprise installed.
You install two new hard disk drives and verify that the disks have been detected by Disk Management.
You need to configure the two new disks for maximum read and write performance.
What should you do? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)

Answer:

QUESTION 488
You are deploying a number of Windows 7 laptops.
You create a custom power plan on one of the laptops that you want to replicate to the other laptops by using an unattended setup.
You need to capture the power plan from the configured laptop for use in the deployment of the other laptops, save it to the removable drive F:, and name it MobileScheme.
What should you do?

A.    Run the command powercfg duplicatescheme <GUID> F:\MobileScheme.pow from an elevated command prompt.
B.    Run the command powercfg -EXPORT F:\MobileScheme.pow {GUID} from an elevated command prompt.
C.    Run the command powercfg -S F:\MobileScheme.pow from an elevated command prompt.
D.    Create a power plan from the Power Options control panel and save it to the F: drive as MobileScheme.

Answer: B

QUESTION 489
Drag and Drop Question
You administer portable computers that have Windows 7 Professional installed.
All computers have wireless network interface cards (Wi-Fi).
You plug a new wireless wide area network (WWAN) device to your computer.
The WWAN device that connects to a 3G network provides Internet access.
Other portable computers equipped only with Wi-Fi cannot access Internet resources.
You need to configure Internet access for the portable computers by using a wireless ad- hoc network configured on your computer.
What should you do? (To answer, drag the appropriate target computer or computers to the correct configuration step or steps in the answer area. An answer choice can be used once, more than once, or not at all.)

Answer:

QUESTION 490
Hotspot Question
You are a system administrator for a regional accounting firm. The existing computers have either Windows Vista Enterprise or Windows Vista Home Premium installed.
Your manager wants you to upgrade all computers to Windows 7.
You need to determine which editions of Windows 7 support an in-place upgrade from the two editions of Windows Vista.
In the table below, identify which editions of Windows 7 will support an in-place upgrade from Windows Vista Enterprise and Home Premium. (Make only one selection in each column. This question is worth two points. )

 
Answer:

These 70-680 exam questions and answers in PDF are prepared by our expert, Moreover, they are based on the recommended syllabus covering all the 70-680 exam objectives. You will find them to be very helpful and precise in the subject matter since all the Microsoft 70-680 exam content is regularly updated and has been checked for accuracy by our team of Microsoft expert professionals.

www.lead2pass.com/70-680.html